Wash Tub Shelf
Materials:
- Rustic Wash Tub
- 1x10 board
- Stain
- Screws, drill, tape measure, level.
Directions:
- Gather all the materials needed.
- Chose where you want the shelf inside the tub. I put mine off center so there would be a larger space at the top.
- Measure the width in the bottom and the top of the tub to get the angle cut correct.
- Cut you board and stain it to your liking.
- Once the stain is dry place the board in the tub and make sure it is level.
- Use a drill to screw the board in place. Put the screws through the side of the tub.
- To hang up we found a stud in the wall and drilled through the bottom of the tub to screw it to the stud.
- Put your things in the shelf and show it off to your guests.
Note: There are many different sizes and shapes of tin buckets that you could use. If you have a large wall space you could hang more than one of these shelves.
